Tensioner supplied with two synthetic ceramic pivots and tensioning plates. Revolving structure permitting a wide tension range. For the warping of cotton and spun yarns from 20 Dtex to 600 Dtex.

Tensioner supplied with three hard steel pivots and one set of tensioning plates. For synthetic and hand made yarns from 120 Dtex to 1000 Dtex.

Tensioner supplied with five synthetic ceramic pivots and two sets of tensioning plates, placing them in any of five pivots, permitting a wide tension range. For the warping of textured polyester and nylon yarns, cotton and acrylics from 120 Dtex to 2.200 Dtex.

Fixed tensioner on creel horizontal rafter. Tensioner supplied with rolls and steel tensioning forks (or in synthetic ceramic). For the tension of yarns subjected to low speeds. To be use on Model JC Jacquard creel (Raschel machines).

Compensating tension system (tension hydraulic muffling). Individual vertical row tension adjustment. Equalized yarn tension, regardless of bobbin diameter and warping speed. Draw-off speed up to 1200 meters / minute.
Model A Preliminary brake disks (increasing the tension on starts and breakages). Oscillating compensating lever (by ceramic rings). Yarn tension range 3 gr – 30 gr. Multi-filaments and mono-filaments, acetate, rayon, other textured yarns from 20 Dtex to 500 Dtex.
Model B Turning pre-tensioning disk. Oscillating compensating lever (by ceramic rings). Yarn tension range 3 gr – 30 gr. Polyester and nylon multi-filaments yarns from 20 Dtex to 167 Dtex.
Model C Preliminary brake disks (increasing the tension on starts and breakages). Oscillating compensating lever (by ceramic pivots). Yarn tension range 40 gr – 600 gr. High tenacity polyester and nylon yarns from 120 Dtex to 2750 Dtex.

Two positive disk drive, self cleaning system preventing dust deposits inside tensioner, offering the best preferential yarn treatment. Tension system by a pressure individual spring. Whole creel tension controlled by motor drive. High selecting precision of desired tension level, equal in all creel yarns, preventing any bobbin tension peaks. Interchangeable pressure elements, according the most suitable, one for each type of yarn. Wide application yarn count. Draw-off speed up to 1.200 meters / minute. Main control panel showing yarn draw-off tension, keeping by electronic system the desired tension automatically in whole creel (optional).

Fixed distance from yarn package to tensioner. Lateral corridors are required for package loading (outside loading). To be directly used on knitting or weaving machines. Permitting the use of any type of yarn. Thread draw-off outside. Steel modular creel system. Designed for any yarn package size offering the best work efficiency. Vertical and horizontal pitch according customer specifications. End quantity, levels and rows, according customer specifications and available space. Fixed package holders suitable for any yarn package type. It can use following tensioner models:   • Set of tensioning disks, tension adjustment by upper spring.   • Set of tensioning disks, tension adjustment by disks.

Several options according to type of yarn and warping: • Movable package holders. Suitable for any yarn package type. • Fixed package holders. • Fixed package holders with removable spindle.

Being supplied fast threading synthetic ceramic yarn guides or synthetic ceramic eyelets. Light warning placed on each set of yarn guides and visible from any position, indicating raw and level of yarn breakage. Integrated stop motion system offering immediate response in case of yarn break or end of cone, being synchronized with warping machine.